| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000019813 |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: C1AB7; Blind Spot Monitor Slave Module; 2018 - 2020 MY Sienna [11/2017 - ] | ||
|
DTC |
C1AB7 |
Blind Spot Monitor Slave Module |
DESCRIPTION
This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.
|
DTC No. |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
C1AB7 |
The blind spot monitor sensor LH (slave) detects an internal malfunction. |
Blind spot monitor sensor LH |
CAUTION / NOTICE / HINT
NOTICE:
When checking for DTCs, make sure that the blind spot monitor system is on.
PROCEDURE
|
1. |
CHECK DTC |
(a) Clear the DTCs (See page
![2018 - 2020 MY Sienna [11/2017 - ]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: DTC CHECK / CLEAR](/t3Portal/stylegraphics/info.gif)
).
(b) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
| OK |
|
| NG |
|
|
|