Warning Indicator Turning on (Slave)
|
State of the outer rear view mirror indicator RH turning on / OFF or ON
|
OFF: Any state except "ON" state
-
ON: Either of the following state
-
During initial check
-
Blind spot monitor system on, vehicle detected on right hand side and turn signal switch not operated
|
-
|
Warning Indicator Flashing (Slave)
|
State of the outer rear view mirror indicator RH flashing / OFF or ON
|
OFF: Any state except "ON" state
-
ON: Either of the following state
-
Blind spot monitor system on, vehicle detected on right hand side and right side of turn signal switch on
-
Vehicle detected by rear cross traffic alert function
|
-
|
Buzzer Sound Status
|
State of the rear cross traffic alert buzzer (blind spot monitor buzzer) / OFF or ON
|
OFF: Buzzer not sounding
ON: Buzzer sounding
|
-
|
Warning Indicator Input Circuit Voltage
|
Outer rear view mirror indicator voltage / Min.: 0 V, Max.: 25.5 V
|
Indicator illuminated: 3.5 to 9.5 V
Indicator not illuminated: Below 1 V
|
-
|
Warning Indicator Input Circuit Current
|
Outer rear view mirror indicator current / Min.: 0 mA, Max.: 255 mA
|
Indicator illuminated: 10 to 100 mA
Indicator not illuminated: Below 0.5 mA
|
-
|
Buzzer Input Circuit Voltage
|
Rear cross traffic alert buzzer (blind spot monitor buzzer) voltage / Min.: 0 V, Max.: 25.5 V
|
Buzzer not sounding: 11 to 14 V
Buzzer sounding: Alternating between 0 to 14 V
|
-
|
Turn Switch State
|
State of the turn signal switch / Left ON, Right ON or OFF
|
Left ON: Left turn signal switch on Right ON: Right turn signal switch on OFF: Turn signal switch off
|
-
|
Reverse (Only for AT/CVT)
|
State of the shift position R signal / OFF or ON
|
OFF: Shift lever in any position except R
ON: Shift lever in R
|
-
|
Vehicle Speed
|
Vehicle speed signal / Min.: -327.68 km/h (-204 mph), Max.: 327.67 km/h (204 mph)
|
Vehicle stopped: 0 km/h (0 mph)
|
-
|
Steering Angle
|
Steering angle sensor / Min.: -3072 deg, Max.: 3070.5 deg
|
Left turn: Increases
Right turn: Decreases
|
-
|
Power Supply Voltage
|
Power supply voltage / Min.: 0 V, Max.: 49.951 V
|
Ignition switch ON: 11 to 14 V
|
-
|
Indicator Light Control State
|
Outer rear view mirror indicator dimming state / Dim OFF, Dim ON
|
Dim OFF: Indicator not dimmed
Dim ON: Indicator dimmed
|
-
|
HV Flag
|
Hybrid vehicle / OFF or ON
|
OFF: Non-hybrid vehicle
ON: Hybrid vehicle
|
-
|
VGRS Flag
|
VGRS installed / OFF or ON
|
OFF: VGRS not installed
ON: VGRS installed
|
-
|
Beam Axis Inspection Completeness Flag
|
Completion of beam axis inspection / Incompl or Compl
|
Incompl: Inspection not completed
Compl: Inspection completed
|
Changes to Compl when Test Mode has been entered.
|
Destination Undefined Flag
|
Destination determination / Fixed or Unfixed
|
Fixed: Sensor destination information determined according to CAN destination information
Unfixed: Sensor destination information not determined
|
-
|
Angle Adjustment by Auto Alignment
|
Angle adjusted using auto alignment / Min.: Under -180 deg, Max.: Over 180 deg
|
Angle adjusted using auto alignment is displayed
|
-
|
RCTA Equipped Information
|
State of the rear cross traffic alert equipped information / OFF or ON
|
OFF: w/o RCTA function
ON: w/ RCTA function
|
-
|
Slave Side RCTA Function
|
Switches the rear cross traffic alert function on and off / OFF or ON
|
OFF: Rear cross traffic alert function off
ON: Rear cross traffic alert function on
|
-
|
Mirror LED Control Frequency
|
Frequency of the outer rear view mirror indicator when operating / Min.: 1500 Hz, Max.: 2400 Hz
|
Always: 1500 to 2400 Hz
|
-
|
Setting of Warning Indicator Current (Dim OFF)
|
Set current of the outer rear view mirror indicator when not dimmed / Min.: 0 mA, Max.: 100 mA
|
Always: 0 to 100 mA
|
-
|
Setting of Warning Indicator Current (Dim ON)
|
Set current of the outer rear view mirror indicator when dimmed / Min.: 0 mA, Max.: 100 mA
|
Always: 0 to 100 mA
|
-
|
Mirror LED Duty Ratio (Blinking)
|
Duty ratio of the outer rear view mirror indicator when blinking / Min.: 0%, Max.: 100%
|
Always: 50 %
|
-
|
Buzzer Control Frequency
|
Frequency of the rear cross traffic alert buzzer (blind spot monitor buzzer) when sounding / Min.: 1000 Hz, Max.: 2400 Hz
|
Always: 2000 Hz
|
-
|
Yaw Rate Sensor
|
Yaw rate sensor / Min.: Under -124.928 deg/s, Max.: 124.684 deg/s
|
Turning right: -124.928 to 0 deg/s
Turning left: 0 to 124.684 deg/s
|
-
|
BSM Buzzer Volume Adjust
|
Volume of the rear cross traffic alert buzzer (blind spot monitor buzzer) / Low, Medium or High
|
Low: Buzzer volume less than that of medium
Medium: Default buzzer volume
High: Buzzer volume more than that of medium
|
-
|
Mounting FHL Function
|
Existence of FHL function / Without or With
|
Without: w/o FHL function
With: w/ FHL function
|
-
|
FHL Function
|
Operation condition of proximity warning function for vehicles to the rear / OFF or ON
|
OFF: The proximity warning function for vehicles to the rear is not operating
ON: The proximity warning function for vehicles to the rear is operating
|
-
|
Number of DTC
|
Number of DTC / Min.: 0, Max.: 255
|
When system is normal: 0
When a malfunction is detected: More than 0
|
-
|