| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000001904B |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: REMOVAL; 2018 - 2020 MY Sienna [11/2017 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE REAR BUMPER COVER
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE BLIND SPOT MONITOR COVER LH
|
(a) Disconnect the connector. |
|
(b) Disengage the clamp.
(c) Remove the 2 nuts and the blind spot monitor sensor cover LH.
3. REMOVE BLIND SPOT MONITOR SENSOR LH
|
(a) Remove the nut and the blind spot monitor sensor LH. |
|
4. REMOVE BLIND SPOT MONITOR COVER RH
|
(a) Disconnect the connector. |
|
(b) Disengage the 3 clamps.
(c) Remove the 3 nuts and the blind spot monitor sensor cover RH.
5. REMOVE BLIND SPOT MONITOR SENSOR RH
|
(a) Remove the blind spot monitor sensor RH. |
|
|
|