Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000001900O |
Model Year Start: 2018 |
Model: Sienna |
Prod Date Range: [11/2017 -
] |
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Data Signal Circuit between Radio Receiver and Stereo Jack Adapter; 2018 - 2020 MY Sienna [11/2017 - ] |
Data Signal Circuit between Radio Receiver and Stereo Jack Adapter
|
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a device to the radio and display receiver assembly via this circuit.
WIRING DIAGRAM
Refer to USB Audio System Recognition/Play Error (See page
).
PROCEDURE
1.
|
CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
|
(a) Disconnect the D215 radio and display receiver assembly connector.
(b) Disconnect the D213 No. 1 stereo jack adapter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
D215-2 (SU1-) - D213-9 (UDO-)
|
Always
|
Below 1 Ω
|
D215-3 (SU1+) - D213-10 (UDO+)
|
Always
|
Below 1 Ω
|
D215-5 (USG1) - D213-12 (UJSS)
|
Always
|
Below 1 Ω
|
D215-2 (SU1-) or D213-9 (UDO-) - Body ground
|
Always
|
10 kΩ or higher
|
D215-3 (SU1+) or D213-10 (UDO+) - Body ground
|
Always
|
10 kΩ or higher
|
D215-5 (USG1) or D213-12 (UJSS) - Body ground
|
Always
|
10 kΩ or higher
|
|
|
*a
|
Front view of wire harness connector
(to Radio and Display Receiver Assembly)
|
*b
|
Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)
|
|
|
OK |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE
(See page
)
|
NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR
|
|