Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM1000000018NVH
Model Year Start: 2018 Model: Sienna Prod Date Range: [11/2017 -           ]
Title: CELLULAR COMMUNICATION: MAYDAY ECU: REMOVAL; 2018 - 2020 MY Sienna [11/2017 -        ]

REMOVAL

PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page 2018 - 2020 MY Sienna [11/2017 -        ]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION ).

2. REMOVE FRONT DOOR SCUFF PLATE RH

(See page 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ )

3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

4. REMOVE COWL SIDE TRIM BOARD RH

(See page 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+ )

5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

(See page 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL+ )

6. REMOVE PARKING ASSIST ECU (w/ Panoramic View Monitor System)

Click here 2018 - 2020 MY Sienna [11/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST ECU: REMOVAL+

7. REMOVE MAYDAY ECU ASSEMBLY

(a) Disconnect the 5 connectors from the mayday ECU assembly.

(b) Remove the bolt.

(c) Remove the nut and mayday ECU assembly.

8. REMOVE TELEPHONE BRACKET SET

(a) Disengage the 3 claws to remove the telephone bracket set.