Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM1000000018KE1 |
Model Year Start: 2018 |
Model: Sienna |
Prod Date Range: [11/2017 -
] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DTC CHECK / CLEAR; 2018 - 2020 MY Sienna [11/2017 - ] |
DTC CHECK / CLEAR
1. DTC CHECK/CLEAR (When Using Techstream)
(a) Check for DTCs.
(1) Turn the ignition switch off.
(2) Connect the Techstream to the DLC3.
(3) Turn the ignition switch to ON.
(4) Turn the Techstream on.
(5) Read the DTCs following the prompts on the Techstream. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
(6) Check the details of the DTCs (See page
).
(b) Clear the DTCs.
(1) Turn the ignition switch off.
(2) Connect the Techstream to the DLC3.
(3) Turn the ignition switch to ON.
(4) Turn the Techstream on.
(5) Operate the Techstream to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes.
(6) Press the DTC clear button.
2. DTC CHECK/CLEAR (When not Using Techstream)
(a) Check for DTCs.
(1) Turn the ignition switch off.
(2) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
Text in Illustration
(3) Turn the ignition switch to ON.
(4) Observe the blinking pattern of the ABS warning and slip indicator lights in order to identify the DTC.
HINT:
If no code appears, inspect the TC and CG terminal circuit, and ABS warning and slip indicator light circuits.
Trouble Area
|
See Procedure
|
TC and CG terminal circuit
|
|
ABS warning light circuit (Remains on)
|
|
ABS warning light circuit (Does not come on)
|
|
Slip indicator light circuit (Remains on)
|
|
Slip indicator light circuit (Does not come on)
|
|
(5) Count the number of blinks of the ABS warning and slip indicator lights.
HINT:
-
How to read DTCs:
Diagnostic trouble codes are represented by the number of blinks of a warning light. For example, code 21 would be shown by 2 blinks, a pause of 1.5 seconds, and then 1 blink.
-
If one code is detected:
The light repeats the same code after a pause of 4 seconds.
-
If multiple codes are detected:
The light outputs one code after another with a 2.5-second pause between each code. When all codes have been output, there is a 4-second pause and then the light begins to output the codes again.
(6) Check the details of the DTCs.
ABS DTC
ABS Warning Light Display
|
Tester Display
|
11
|
C146E
|
12
|
C146F
|
13
|
C142B
|
C146C
|
14
|
C146D
|
21
|
C1468
|
22
|
C1469
|
23
|
C146A
|
24
|
C146B
|
25
|
C1225
|
31
|
C1401
|
C1405
|
32
|
C1402
|
C1406
|
33
|
C1403
|
C1407
|
34
|
C1404
|
C1408
|
35
|
C1413
|
36
|
C1414
|
38
|
C1415
|
39
|
C1416
|
41
|
C120B
|
C1241
|
C1417
|
43
|
C1232
|
C1243
|
44
|
C1419
|
C1442
|
45
|
C1245
|
46
|
C1421
|
C1422
|
C1423
|
C1424
|
C142A
|
C1449
|
49
|
C1425
|
C1426
|
51
|
C1427
|
C1428
|
59
|
C1203
|
67
|
C1429
|
C1430
|
C1431
|
94
|
U0073
|
95
|
U0124
|
97
|
C1381
|
98
|
C1336
|
VSC DTC
Slip Indicator Light Display
|
Tester Display
|
31
|
C1432
|
C1433
|
C1434
|
34
|
C1435
|
C1436
|
C1443
|
36
|
C1210
|
63
|
U0126
|
65
|
C1437
|
U0100
|
66
|
C1290
|
C1439
|
C1445
|
98
|
C1440
|
*: This DTC is output when the VSC system detects a malfunction in the ABS.
(7) After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.
If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.
(b) Clear the DTCs.
(1) Turn the ignition switch off.
(2) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
Text in Illustration
(3) Turn the ignition switch to ON.
(4) Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.
(5) Check that the warning light indicates a normal system code.
(6) Remove SST from the terminals of the DLC3.
HINT:
The DTCs cannot be cleared by disconnecting the battery terminal or the ECU-IG1 NO. 1 fuse.
3. END OF DTC CHECK/CLEAR
(a) Turn the ignition switch to ON.
(b) Check that the ABS warning and slip indicator lights go off within approximately 3 seconds after turning the ignition switch to ON.
|