Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM1000000018JBQ |
Model Year Start: 2018 |
Model: Sienna |
Prod Date Range: [11/2017 -
] |
Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: DTC CHECK / CLEAR; 2018 - 2020 MY Sienna [11/2017 - ] |
DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Advanced Parking Guidance/Parking Assist Monitor / Trouble Codes.
(e) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
(f) Check for DTCs.
Click here
NOTICE:
The radio and display receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.
System
|
Proceed to
|
Navigation System
|
|
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Advanced Parking Guidance/Parking Assist Monitor / Trouble Codes.
(e) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
(f) Clear the DTCs.
|