- Spiral cable with sensor sub-assembly
- Rear television camera assembly
| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018JAW |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: C1626; Steering Angle Sensor Failure; 2018 - 2020 MY Sienna [11/2017 - ] | ||
|
DTC |
C1626 |
Steering Angle Sensor Failure |
DESCRIPTION
This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the spiral cable with sensor sub-assembly that indicates an internal malfunction.
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
C1626 |
A fail flag is transmitted from the spiral cable with sensor sub-assembly |
|
CAUTION / NOTICE / HINT
NOTICE:
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: CALIBRATION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
|
1. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Click here
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Result
|
Result |
Proceed to |
|---|---|
|
DTC C1626 is output |
A |
|
DTC C1626 is not output |
B |
| B |
|
|
|
2. |
REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |
(a) Replace the spiral cable with sensor sub-assembly with a new or known good one.
Click here
|
|
3. |
CHECK DTC OUTPUT |
(a) Clear the DTCs.
Click here
(b) Recheck for DTCs and check that no DTCs are output.
Click here
Result
|
Result |
Proceed to |
|---|---|
|
DTC C1626 is output |
A |
|
DTC C1626 is not output |
B |
| A |
|
| B |
|
END |
|
|