Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM1000000018HXK |
Model Year Start: 2018 |
Model: Sienna |
Prod Date Range: [11/2017 -
] |
Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION; 2018 - 2020 MY Sienna [11/2017 - ] |
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one.
PROCEDURE
1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
NOTICE:
If the front bumper assembly, radiator grill, millimeter wave radar sensor assembly or No. 1 millimeter wave radar sensor bracket has been replaced, check that the beam axis change mechanism is at the standard position (centered).
(a) Set beam axis to the standard position.
(1) Turn the bolt so that the beam axis change mechanism is positioned as shown in the illustration.
Specified Condition:
Difference between (A) and (B)
1 mm (0.0394 in.) or less
Torque:
1.5 N·m {15 kgf·cm, 13 in·lbf}
|
|
(b) Engage the 2 guides to install the millimeter wave radar sensor assembly.
|
Bolt
|
|
Screw
|
(c) Install the 2 bolts and 2 screws in the order shown in the illustration.
Torque:
Bolt :
2.5 N·m {25 kgf·cm, 22 in·lbf}
(d) Connect the connector.
2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
Click here
3. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
Click here
|