| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018H8K |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: LIGHTING (EXT): LIGHTING SYSTEM: CUSTOMIZE PARAMETERS; 2018 - 2020 MY Sienna [11/2017 - ] | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(1) Turn the ignition switch to ON.
(2) Turn the Techstream on.
(3) Enter the following menus: Customize Setting / Light Control.
(4) Select the setting by referring to the table below.
Light Control
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Response Time*1 |
Normal |
Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. |
Normal or Long |
Main Body ECU |
|
Disp Ex ON Sen |
NORMAL |
Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock. |
LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
Main Body ECU |
|
Disp Ex OFF Sen |
NORMAL |
Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock. |
LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 |
Main Body ECU |
|
Light Auto OFF Delay*2 |
30 s |
Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all the doors with the low beam headlights on. |
OFF, 30 s, 60 s or 90 s |
Main Body ECU |
|
Sensitivity |
Normal |
Adjusts the sensitivity of the automatic light control system. |
Light2, Light1, Normal, Dark1 or Dark2 |
Main Body ECU |
|
DRL Function |
ON |
ON/OFF of the DRL function |
ON or OFF |
Main Body ECU |
|
Automatic High Beams*3 |
ON |
ON/OFF of the automatic high beam function. |
ON or OFF |
Main Body ECU |
|
Exterior Light Control*4 |
ON |
Changes the door mirror foot light control. |
ON or OFF |
Main Body ECU |
- *1: for Korea
- *2: Except Korea
- *3: w/ HID Headlight System
- *4: w/ Seat Position Memory
(b) Customizing using the radio and display receiver assembly.
(1) Turn the ignition switch to ON.
(2) Enter the following menus: Setup / Vehicle / Vehicle Customization / Lights Settings.
(3) Select the setting by referring to the table below.
Lights Settings
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Headlights Auto-on Sensitivity |
0 |
Adjusts the sensitivity of the automatic light control system. |
-2, -1, 0, +1 or +2 |
Main Body ECU |
|
Headlights Auto-off timer |
30 sec. |
Keep the headlights on for a certain period of time after turning the ignition switch off and closing all doors with the low beam headlights on. |
Off, 30 sec., 60 sec. or 90 sec. |
Main Body ECU |
|
Daytime running lights |
On |
ON/OFF of the DRL function |
On or Off |
Main Body ECU |
|
Exterior lights Auto-off timer |
15 sec. |
Changes the lighting time of the door mirror foot lights. |
Off, 7.5 sec., 15 sec. or 30 sec. |
Main Body ECU |
|
|