| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018F7Z |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: CD/DVD Sound Skips; 2018 - 2020 MY Sienna [11/2017 - ] | ||
|
CD/DVD Sound Skips |
CAUTION / NOTICE / HINT
NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION](/t3Portal/stylegraphics/info.gif)
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occurs:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
PROCEDURE
|
1. |
CHECK DISC |
|
(a) Check that the disc is not deformed or cracked. OK: No deformation or cracks on the disc. |
|
| NG |
|
CHANGE DISC |
|
|
2. |
CHECK DISC |
|
(a) Disc cleaning (1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction. OK: Malfunction disappears. NOTICE: Do not use a conventional record cleaner or antistatic preservative. |
|
| OK |
|
END (DISC WAS DIRTY) |
|
|
3. |
REPLACE DISC WITH ANOTHER AND RECHECK |
(a) Replace the disc with a known good one and check that the malfunction disappears.
OK:
Malfunction disappears.
| OK |
|
END (DISC WAS DEFECTIVE) |
|
|
4. |
CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY |
(a) Check the radio and display receiver assembly installation condition.
(b) Check that the radio and display receiver assembly is properly installed
OK:
The radio and display receiver assembly is properly installed.
| OK |
|
| NG |
|
|
|