Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM1000000018F7V
Model Year Start: 2018 Model: Sienna Prod Date Range: [11/2017 -           ]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Disc cannot be Ejected; 2018 - 2020 MY Sienna [11/2017 -        ]

Disc cannot be Ejected

CAUTION / NOTICE / HINT

NOTICE:

  • Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

    Click here 2018 - 2020 MY Sienna [11/2017 -        ]; AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: PRECAUTION

  • When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occurs:
    • A communication malfunction DTC may be stored.
    • The radio and display receiver assembly may not operate normally.

PROCEDURE

1.

PRESS "EJECT" AND CHECK OPERATION

(a) Press the disc eject switch of the radio and display receiver assembly for 5 seconds or more and check that the disc is ejected.

OK:

Disc is ejected.

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

OK

2.

REPLACE DISC WITH ANOTHER AND RECHECK

(a) Replace the disc with a known good one and check that the malfunction disappears.

OK:

Disc is ejected.

OK

END (DISC WAS DEFECTIVE)
NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY