AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: SYSTEM DESCRIPTION; 2018 MY Sienna [11/2017

(a) A disc player uses a laser pickup to read digital signals recorded on a disc. By converting the digital signals to analog, it can play music, video and audio.

Do not look directly at the laser pickup because the disc player uses an invisible laser beam. Be sure to operate the player only as instructed.

NOTICE:

Do not disassemble any part of the disc player.
Do not apply oil to the disc player.
Do not insert anything but a disc into the disc player.

(b) This player can play only audio CDs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) that have any of the following marks:

(d) This player can play only DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable) that were recorded in video format and that have any of the following marks: (w/ DVD Player)

NOTICE:

CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable)*1 may not be played depending on the recording conditions or characteristics of the discs, or due to damage, dirt or deterioration caused by leaving the discs in the cabin for a long time.
Unfinalized CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable)*1 cannot be played.
CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable)*1 are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not play.
If there are fingerprints or scratches on a disc, the disc may not play or the disc may skip.
Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable)*1 may deteriorate if they are left in the cabin for a long time.
Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable) and DVD-RWs (DVD-ReWritable)*1 in an opaque case.
SECAM color television standard discs cannot be played.
DualDiscs that combine DVD recorded material on one side with CD digital audio material on the other cannot be played.
Keep the discs away from dirt. Be careful not to damage the discs or leave fingerprints on them.
Hold discs by the outer edge and center hole with the label side up.
Leaving the disc exposed halfway out of the slot for a long time after pressing the disc eject button may cause deformation of the disc, making the disc unusable.
If discs have adhesive tape, stickers, disc labels or any traces of such labels attached, the discs may not be ejected or player malfunctions may result.
Keep the discs away from direct sunlight. (Exposure to direct sunlight may cause deformation of the disc, making the disc unusable.)
Do not use odd-shaped disc because these may cause player malfunctions.
Do not use discs whose recording portion is transparent or translucent because they may not be inserted, ejected or played normally.
Use only 4.7 in. (12 cm) discs.
Do not use 3 in. (8 cm) CDs either with or without adaptors.

HINT:

When it is cold or raining, if the windows fog up, mist and condensation may form in the player. In such cases, the disc may skip or stop in the middle of play. Ventilate or dehumidify the cabin for a while before using the player.
The disc may skip if the player experiences strong vibrations when the vehicle is driven on rough roads or similar uneven surfaces.

Do not use a lens cleaner because it may cause a malfunction in the pickup portion of the player.

(1) If dirt is on the disc surface, wipe it clean with a soft dry cloth such as an eyeglass cleaner for plastic lenses from the inside to the outside in a radial direction.

NOTICE:

Pressing on the disc by hand or rubbing the disc with a hard cloth may scratch the disc surface.
Use of solvents such as record spray, antistatic agents, alcohol, benzine, thinners or a chemical cloth may cause damage to the disc, making the disc unusable.

(a) The No. 1 stereo jack adapter assembly is equipped with a USB connector. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, it is also possible to play MP3, WMA, AAC, WAV, FLAC, ALAC or OGG Vorbis music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.

Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.

MP3, WMA and AAC files written in any format other than those listed above may not play correctly, and their names and folder names may not be displayed correctly.

"iPhone", "iPod", "iPod classic", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.

The following "iPod", "iPod nano", "iPod classic", "iPod touch" and "iPhone" devices can be used with this system.

w/ Navigation System

"iPod touch" (6th generation)
"iPod touch" (5th generation)
"iPod touch" (4th generation)
"iPod touch" (3rd generation)
"iPod touch" (2nd generation)
"iPod touch" (1st generation)
"iPod nano" (7th generation)
"iPod nano" (6th generation)
"iPod nano" (5th generation)
"iPod nano" (4th generation)
"iPhone SE"
"iPhone 6s Plus"
"iPhone 6s"
"iPhone 6 Plus"
"iPhone 6"
"iPhone 5s"
"iPhone 5c"
"iPhone 5"
"iPhone 4s"
"iPhone 4"
"iPhone 3GS"
"iPhone 3G"

Depending on differences between models or software versions etc., some models might be incompatible with this system.

(b) The definition of high-resolution is based on the standards of groups such as the CTA (Consumer Technology Association).

(1) Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.

This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1.)

(2) Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.

(3) Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.

(4) Additional text information called a TAG can be input to WAV (LPCM), FLAC, ALAC files. Information such as song titles and artist names can be stored.

(5) Additional text information called a Vorbis comment can be input to OGG Vorbis files. Information such as song titles and artist names can be stored.

(1) Only CD-ROMs, CD-Rs (CD-Recordable), CD-RWs (CD-ReWritable), DVD-ROMs*1, DVD-Rs (DVD-Recordable)*1, DVD-RWs (DVD-ReWritable)*1 and USB devices can be used to play MP3/WMA/AAC files.

NOTICE:

CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable)*1 and DVD-RWs (DVD-ReWritable)*1 are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not be played.
If there are fingerprints or scratches on a disc, the disc may not be played or may skip.
Some CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable)*1 and DVD-RWs (DVD-ReWritable)*1 may deteriorate if they are left in the cabin for a long time.
Keep CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable)*1 and DVD-RWs (DVD-ReWritable)*1 in an opaque case.

HINT:

MP3/WMA/AAC files written in any unlisted format may not be played normally or the file names or folder names may not be displayed correctly.
This player is compatible with multi-session discs and can play CD-Rs, CD-RWs, DVD-Rs (DVD-Recordable)*1 and DVD-RWs (DVD-ReWritable)*1 on which MP3/WMA/AAC files have been added. However, only the first session can be played.
Discs whose first session includes both music data and MP3, WMA and AAC format data may not be played.

(1) Only files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac", ".ogg" and ".oga" can be recognized and played as MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files.

(2) Save MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac", ".ogg" or ".oga".

If non-MP3, non-WMA, non-AAC, non-WAV (LPCM), non-FLAC, non-ALAC or non-OGG Vorbis files are saved with an extension of ".mp3", ".wma", ".m4a", ".wav", ".flac", ".alac", ".ogg" or ".oga", those files may be wrongly recognized as MP3, WMA, AAC, WAV (LPCM), FLAC, ALAC or OGG Vorbis files and played. A loud noise may occur and damage to the speakers may result.

Text in Illustration

(b) "Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.

The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.

(1) The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible cellular phone*1 can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.

(2) The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.

(1) The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio and display receiver assembly.

The amount of remaining battery charge displayed on the radio and display receiver assembly may be different from that of the "Bluetooth" device.

(1) The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.

Text in Illustration

In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.

Text in Illustration

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.

Text in Illustration

Fade out is caused by objects (buildings, mountains and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to deflect.

Text in Illustration

Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.

(a) The "HD Radio" system is a radio system that broadcasts in the IBOC (In-Band On-Channel) form that the iBiquity Co. has developed. By expanding the bandwidth per channel of conventional FM/AM bands, digital audio and data signals are additionally transmitted.

"HD Radio" technology is manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. "HD Radio" and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corporation.

(a) SiriusXM (SXM) satellite radio is a satellite digital radio broadcast provided by SiriusXM Radio Inc. The broadcast (pay-type) is performed through satellites and terrestrial repeater networks. Several unique channels are available, and even if a vehicle changes locations, the same information can be received without breaks. Information such as song names, broadcast station names, etc. can be received.

To receive audio-visual pay-type broadcasts, the customer must enter into a pay-type contract with XM Satellite Radio Inc. After entering into a contract, registration of the XM Radio ID is necessary. Also, if parts are replaced, the XM Radio ID must be re-registered.

When disconnecting the cable from the negative (-) battery terminal, the broadcast station logo data will be initialized. It takes a while for the broadcast station logo data to be updated to the latest data.

(a) Customization of functions can also be performed on the multi-display screen. Refer to Owner's Manual for further information on customizable items for the audio and visual system.

(a) The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume level based upon vehicle speed signals that it receives from the combination meter assembly.

(a) "MirrorLink" is a function that enables the radio and display receiver assembly to operate applications on a cellular phone which meets Car Connectivity Consortium standards by connecting the cellular phone to the radio and display receiver assembly with a USB cable or USB cable and "Wi-Fi".

(b) Only cellular phones which have passed the Car Connectivity Consortium MirrorLink 1.1 or later (including MirrorLink 1.2) Certification Program are compatible.

For details, refer to http://carconnectivity.org/ and http://www.mirrorlink.com/

For details about MirrorLink compatibility, contact the cellular phone manufacturer.

(a) The Radio Broadcast Data System (RBDS) is broadcast through conventional FM radio broadcasts. Information such as song names, traffic information, broadcast station names, etc. can be received.

(a) "Wi-Fi" is a worldwide wireless communication standard widely used as a short range communication tool.

(b) "Wi-Fi" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.

The communication performance of "Wi-Fi" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.

(1) Components of the audio and visual system communicate with each other via the local bus.

(3) The master unit of the local bus is the radio and display receiver assembly.

(1) Components of the audio and visual system communicate with each other via AVC-LAN communication.

(1) The audio and visual system uses CAN communication between the radio and display receiver assembly and ECUs.

(a) The audio and visual system has a diagnostic function (the result is indicated on the master unit).

(a) With a compatible portable device connected via "Bluetooth", this function allows the system to interface directly for voice recognition functions. The steering pad switch assembly is operated to start the Mobile Assistant function and the function is operated by using voice commands.

Mobile assistant may not operate or the device may become unresponsive depending on the type of device connected, OS (iOS/Android) version or Google app version.

(1) "Miracast" is a trademark owned by Wi-Fi Alliance, a non-profit industry association.

(2) "Miracast" uses the "Wi-Fi" connection (P2P function) to display cellular phone and tablet screens on the multi-display and allows for audio on the cellular phone, etc., to be streamed through vehicle speakers.

HINT:

While driving only sound playback is supported. Videos are not displayed.
When Bluetooth audio and "Miracast" are connected simultaneously, audio output priority varies depending on the specifications of the device.
Bluetooth and "Miracast" and other "Wi-Fi" use the same 2.4 GHz band radio waves. As a result, if Bluetooth audio and "Miracast" are connected at the same time some sound skipping and image distortion, etc., may occur.

SYSTEM DESCRIPTION

w/o CD Player

w/ CD Player

w/ Navigation System

Text in Illustration

Text in Illustration

Text in Illustration

Text in Illustration

Text in Illustration