Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM1000000018DRY |
Model Year Start: 2018 |
Model: Sienna |
Prod Date Range: [11/2017 -
] |
Title: DOOR / HATCH: HOOD: ADJUSTMENT; 2018 - 2020 MY Sienna [11/2017 - ] |
ADJUSTMENT
CAUTION / NOTICE / HINT
HINT:
-
Centering bolts are used to mount the hood hinge and hood lock. The hood and hood lock cannot be adjusted with the centering bolts in. Substitute standard bolts (with washers) for the centering bolts when making adjustments.
-
For bolts without torque specifications, check the standard bolt chart.
Click here
PROCEDURE
1. ADJUST HOOD SUB-ASSEMBLY
(a) Loosen the 4 hood side hinge bolts.
|
|
(b) Move the hood to adjust the clearance to within the standard range.
Click here
(c) Tighten the 4 hood side hinge bolts after the adjustment.
Torque:
13 N·m {133 kgf·cm, 10 ft·lbf}
(d) Adjust the height of the hood front end by turning the cushion rubber.
Click here
HINT:
The cushion rubber can be raised and lowered by turning it.
|
|
2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
Click here
3. REMOVE HOOD LOCK NUT CAP
Click here
4. ADJUST HOOD LOCK ASSEMBLY
(b) Adjust the hood lock position so that the striker can enter it smoothly.
|
|
(c) Tighten the 3 bolts after the adjustment.
Torque:
8.0 N·m {82 kgf·cm, 71 in·lbf}
5. INSTALL HOOD LOCK NUT CAP
Click here
6. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
Click here
|