| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018CZF |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION; 2018 - 2020 MY Sienna [11/2017 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL FRONT BUMPER COVER
(a) Engage the 10 claws and install the front bumper cover
(b) Connect the connectors.
HINT:
If the vehicle is equipped with fog lights, connect the connector.
(c) Tighten the 6 screws.
(d) Install the 3 clips.
|
(e) Install the pin hold clip. NOTICE: Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical. HINT: Use the same procedure for the remaining part. |
|
(f) Install the screw.
HINT:
Use the same procedure for the remaining part.
2. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
|
(a) Install the front wheel opening extension pad with the 4 screws. |
|
4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
HINT:
Use the same procedure as for the LH side.
5. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light)
Click here
6. PREPARE FOR FOG LIGHT AIMING (w/ Fog Light)
Click here
7. INSPECT FOG LIGHT AIMING (w/ Fog Light)
Click here
8. ADJUST FOG LIGHT AIMING (w/ Fog Light)
Click here
|
|