| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018CZ9 |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL; 2018 - 2020 MY Sienna [11/2017 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
(a) Remove the 4 screws and front wheel opening extension pad.
2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
HINT:
Use the same procedure as for the LH side.
3. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL](/t3Portal/stylegraphics/info.gif)
4. REMOVE FRONT BUMPER COVER
|
Protective Tape |
(a) Apply protective tape, as shown in the illustration.
|
(b) Using a screwdriver, remove the pin hold clip. HINT: Use the same procedure for the remaining parts. |
|
(c) Remove the screw.
HINT:
Use the same procedure for the remaining parts.
|
(d) Remove the 3 clips. |
|
|
(e) Remove the 6 screws. |
|
|
(f) Disengage the 10 claws and remove the front bumper cover. |
|
(g) Disconnect the connectors.
HINT:
If the vehicle is equipped with fog light assembly, No. 1 ultrasonic sensor and front television camera assembly, disconnect the connector.
|
|