Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM1000000018CZ9
Model Year Start: 2018 Model: Sienna Prod Date Range: [11/2017 -           ]
Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL; 2018 - 2020 MY Sienna [11/2017 -        ]

REMOVAL

PROCEDURE

1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

(a) Remove the 4 screws and front wheel opening extension pad.

2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

HINT:

Use the same procedure as for the LH side.

3. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Click here 2018 - 2020 MY Sienna [11/2017 -        ]; EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL

4. REMOVE FRONT BUMPER COVER

Protective Tape

(a) Apply protective tape, as shown in the illustration.

(b) Using a screwdriver, remove the pin hold clip.

HINT:

Use the same procedure for the remaining parts.

(c) Remove the screw.

HINT:

Use the same procedure for the remaining parts.

(d) Remove the 3 clips.

(e) Remove the 6 screws.

(f) Disengage the 10 claws and remove the front bumper cover.

(g) Disconnect the connectors.

HINT:

If the vehicle is equipped with fog light assembly, No. 1 ultrasonic sensor and front television camera assembly, disconnect the connector.