Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM1000000018CY1
Model Year Start: 2018 Model: Sienna Prod Date Range: [11/2017 - 08/2018]
Title: DOOR LOCK: SLIDE DOOR LOCK: REMOVAL; 2018 MY Sienna [11/2017 - 08/2018]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the RH side.

PROCEDURE

1. REMOVE REAR DOOR ARMREST BASE UPPER PANEL

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

3. REMOVE REAR DOOR GLASS WEATHERSTRIP INNER WITH GARNISH

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

4. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/o Power Slide Door)

(a) Disconnect the connector.

(b) Remove the 3 bolts.

(c) Disengage the guide.

(d) Disconnect the 4 cables and remove the slide door handle.

5. REMOVE SLIDE DOOR HANDLE ASSEMBLY (w/ Power Slide Door)

(a) Disconnect the 2 connectors.

(b) Remove the 3 bolts.

(c) Disengage the guide.

(d) Disconnect the 5 cables and remove the slide door lock handle.

6. REMOVE REAR DOOR SCUFF PLATE

Click here 2018 - 2020 MY Sienna [11/2017 -        ]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+

7. REMOVE QUARTER TRIM COVER HOLE

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

8. REMOVE REAR DOOR WIRE (w/o Power Slide Door)

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

9. REMOVE REAR DOOR WIRE (w/ Power Slide Door)

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

10. REMOVE QUARTER WINDOW GLASS (w/ Power Slide Door)

Click here 2016 - 2020 MY Sienna [12/2015 -        ]; WINDOW / GLASS: QUARTER WINDOW GLASS: REMOVAL

11. REMOVE SLIDE RAIL END MOULDING (w/ Power Slide Door)

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

12. REMOVE POWER SLIDE DOOR MOTOR UNIT (w/ Power Slide Door)

Click here 2016 - 2020 MY Sienna [12/2015 -        ]; DOOR / HATCH: POWER SLIDE DOOR MOTOR: REMOVAL+

13. REMOVE SLIDE DOOR SERVICE HOLE COVER

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

14. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

HINT:

Use the same procedure as for the LH side.

Click here 2016 - 2020 MY Sienna [12/2015 -        ]; EXTERIOR PANELS / TRIM: REAR DOOR WINDOW FRAME MOULDING: REMOVAL+

15. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

HINT:

Use the same procedure as for the LH side.

Click here 2016 - 2020 MY Sienna [12/2015 -        ]; EXTERIOR PANELS / TRIM: REAR DOOR BELT MOULDING: REMOVAL+

16. REMOVE REAR DOOR GLASS RUN

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

17. REMOVE REAR DOOR BELT FRONT SEAL

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

18. REMOVE NO. 2 REAR DOOR GLASS RUN

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

19. REMOVE REAR DOOR GLASS SUB-ASSEMBLY

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

20. REMOVE REAR DOOR WINDOW REAR LOWER FRAME SUB-ASSEMBLY

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

21. REMOVE FRONT DOOR INSIDE LOCKING LINK PROTECTOR

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

22. REMOVE REAR DOOR INSIDE LOCKING LINK PROTECTOR

Click here 2018 MY Sienna [11/2017 - 08/2018]; DOOR / HATCH: SLIDE DOOR: DISASSEMBLY+

23. REMOVE SLIDE DOOR FRONT LOCK ASSEMBLY

(a) Disengage the clamp.

(b) Disconnect the rod.

(c) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door front lock.

24. REMOVE SLIDE DOOR REAR LOCK ASSEMBLY (w/o Power Slide Door)

(a) Disengage the 2 clamps.

(b) Using a T30 "TORX" socket wrench, remove the 3 screws and slide door rear lock.

25. REMOVE POWER SLIDE DOOR LOCK ASSEMBLY (w/ Power Slide Door)

(a) Disengage the 2 clamps.

(b) Remove the bolt.

(c) Using a T30 "TORX" socket wrench, remove the 3 screws and power slide door lock.