| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018CSP |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: MIRROR (EXT): OUTER REAR VIEW MIRROR: REMOVAL; 2018 - 2020 MY Sienna [11/2017 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY
HINT:
Use the same procedure as for the RH side.
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; DOOR / HATCH: FRONT DOOR: DISASSEMBLY+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
HINT:
Use the same procedure as for the RH side.
Click here
3. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH
HINT:
Use the same procedure as for the RH side.
Click here
4. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION
HINT:
Use the same procedure as for the RH side.
Click here
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
HINT:
Use the same procedure as for the RH side.
Click here
6. SEPARATE FRONT DOOR SERVICE HOLE COVER
|
(a) Separate the front door service hole cover to the extent that the outer rear view mirror connector can be disconnected. |
|
7. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY
|
(a) Disconnect the connector. |
|
(b) Remove the 3 nuts.
(c) Disengage the claw and remove the outer rear view mirror.
8. REMOVE OUTER MIRROR GLASS
Click here
9. REMOVE OUTER MIRROR LIGHT ASSEMBLY (w/ Side Turn Signal Light)
Click here
10. REMOVE SIDE TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
Click here
11. REMOVE OUTER MIRROR COVER (w/o Side Turn Signal Light)
|
(a) Disengage the 8 claws and remove the outer mirror cover. |
|
12. REMOVE OUTER MIRROR COVER (w/ Side Turn Signal Light)
|
(a) Disengage the 8 claws and remove the outer mirror cover. |
|
13. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY (w/ Side Turn Signal Light)
Click here
|
|