| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM1000000018CMC |
| Model Year Start: 2018 | Model: Sienna | Prod Date Range: [11/2017 - ] |
| Title: MIRROR (INT): INNER REAR VIEW MIRROR: INSTALLATION; 2018 - 2020 MY Sienna [11/2017 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)
|
(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw. Torque: 1.5 N·m {15 kgf·cm, 13 in·lbf} |
|
2. INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)
|
(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw. Torque: 1.5 N·m {15 kgf·cm, 13 in·lbf} |
|
(b) Connect the connector.
3. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Toyota Safety Sense)
Click here
![2018 - 2020 MY Sienna [11/2017 - ]; CRUISE CONTROL: FRONT CAMERA: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Toyota Safety Sense)
Click here
5. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (for EC Mirror without Toyota Safety Sense)
|
(a) Engage the 2 claws to temporarily install the inner rear view mirror stay holder cover. |
|
(b) Engage the 2 claws to install the inner rear view mirror stay holder cover as shown in the illustration.
|
|