"Bluetooth" is inoperative (In-vehicle device cannot be recognized by the cellular phone)
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
"Bluetooth" compatible cellular phone cannot be registered
|
Proceed to "Cellular Phone Registration Failure"
|
|
"Bluetooth" compatible cellular phone cannot be connected
|
Check that no other cellular phone is connected as a hands-free device
|
-
|
Bring the cellular phone near the in-vehicle device and reconnect it
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
"Bluetooth" compatible cellular phone cannot be connected automatically (can be connected manually)
|
Check that "Bluetooth" automatic connection setting of the in-vehicle device is on
|
-
|
Radio and display receiver assembly
|
|
"Bluetooth" compatible cellular phone connection is disconnected
|
Bring the cellular phone near the in-vehicle device and check if it is reconnected
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Message that prompts to check the cellular phone is displayed
|
Bring the cellular phone near the in-vehicle device and check if it is reconnected
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed
|
Turn the cellular phone connection confirmation display on the in-vehicle device off
|
-
|
Phonebook data cannot be transferred
|
Check that the phonebook automatic transfer setting of the in-vehicle device is on
|
-
|
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)
|
-
|
Check that no applications on the cellular phone are running
|
-
|
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation
|
-
|
Transfer phonebook data manually
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Phonebook data is cleared
|
Radio and display receiver assembly
|
|
Phonebook data cannot be edited
|
Check that the phonebook data automatic transfer setting is off
|
-
|
Radio and display receiver assembly
|
|
All the transferred phonebook data is sorted to "Other"
|
Check that no applications on the cellular phone are operating
|
-
|
Check that phonebook data in the cellular phone is not stored to the SIM card
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Explain to the customer that all the transferred phonebook data may be stored to "Other" depending on cellular phone
|
-
|
Cellular phone cannot make outgoing/ incoming calls
|
Move the vehicle into a cellular phone service area, check that the "Bluetooth" device is connected to the vehicle and operate device again
|
-
|
Check that the cellular phone can make outgoing/incoming calls properly when not connected via "Bluetooth"
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Other caller's voice is interrupted by noise or sound quality is poor
|
Check the receiving voice volume (if it is too high, voice may sound distorted)
|
-
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
|
-
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Other caller's voice cannot be heard
|
Check that reception voice volume is not set to minimum
|
-
|
Make a call with the cellular phone disconnected from "Bluetooth" and check that other caller's voice can be heard clearly
|
-
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Caller's voice (your voice) is interrupted by noise or sound quality is poor
|
Check the transmitting voice volume (if it is too high, voice may sound distorted)
|
-
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
|
-
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
|
Proceed to "Cellular Phone Inspection"
|
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
|
Other caller cannot hear your voice
|
When talking on the cellular phone, check that the mute button is not pressed
|
-
|
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
|
-
|
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
|
|
Proceed to "Cellular Phone Inspection"
|
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
|
No notification when a new SMS/MMS/e-mail has been received
|
Check the SMS/MMS/e-mail notification settings on the cellular phone and the Radio and display receiver assembly
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
Received SMS/MMS/e-mail cannot be read
|
Check the SMS/MMS/e-mail transfer settings on the cellular phone and the Radio and display receiver assembly
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|
SMS/MMS/e-mail cannot be replied to
|
Move the vehicle into a cellular phone service area, and check the operation of the Radio and display receiver assembly and cellular phone
|
-
|
Check that the cellular phone can send an SMS/MMS/e-mail
|
-
|
Proceed to "Cellular Phone Inspection"
|
|
Radio and display receiver assembly
|
|