|
(a) Measure the resistance according to the value(s) in the table below when the transmission control shaft lever is moved to each position.
Standard Resistance:
|
Tester Connection
|
Condition
|
Specified Condition
|
|
1 (RB) - 3 (PL)
4 (B) - 9 (L)
|
Shift lever in P
|
Below 1 Ω
|
|
Shift lever not in P
|
10 kΩ or higher
|
|
1 (RB) - 2 (RL)
|
Shift lever in R
|
Below 1 Ω
|
|
Shift lever not in R
|
10 kΩ or higher
|
|
1 (RB) - 8 (NL)
4 (B) - 9 (L)
|
Shift lever in N
|
Below 1 Ω
|
|
Shift lever not in N
|
10 kΩ or higher
|
|
1 (RB) - 7 (DL)
|
Shift lever in D, S, "+" or "-"
|
Below 1 Ω
|
|
Shift lever not in D, S, "+" or "-"
|
10 kΩ or higher
|
If the result is not as specified, replace the park/neutral position switch.
|
|
|
*a
|
Component without harness connected
(Park/Neutral Position Switch)
|
|
|
