Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000001037O
Model Year Start: 2017 Model: Sienna Prod Date Range: [08/2016 -           ]
Title: EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL; 2017 - 2020 MY Sienna [08/2016 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

If the bumper is damaged, there is a possibility that the installation area of the blind spot monitor sensor may be deformed and the blind spot monitor system may not operate correctly, so visually inspect the blind spot monitor sensor installation area (frame, stud bolt) to make sure it is not dented or bent.

Click here 2017 MY Sienna [08/2016 - 11/2017]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: OPERATION CHECK 2018 - 2020 MY Sienna [11/2017 -        ]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM: OPERATION CHECK

If the visual inspection finds a problem, check the installation condition of the blind spot monitor sensor, and adjust the installation position of the blind spot monitor sensor as necessary.

PROCEDURE

1. REMOVE REAR BUMPER COVER

(a) Remove the 3 clips.

(b) Remove the screw.

HINT:

Use the same procedure for the remaining parts.

(c) Remove the 5 screws.

(d) Remove the 2 bolts and 2 screws.

(e) Disengage the 2 claws and remove the rear bumper upper stopper.

HINT:

Use the same procedure for the remaining parts.

(f) Disengage the 20 claws and remove the rear bumper cover.