| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000ZAQ5 |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS STARTING: ENGINE SWITCH: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE CONSOLE BOX ASSEMBLY (for Slide Type)
![2016 - 2020 MY Sienna [12/2015 - ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX(for Slide Type): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE CONSOLE BOX ASSEMBLY (for Fixed Type)
3. REMOVE DOOR SCUFF PLATE ASSEMBLY RH
4. REMOVE DOOR SCUFF PLATE ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
5. REMOVE COWL SIDE TRIM BOARD RH
6. REMOVE COWL SIDE TRIM BOARD LH
HINT:
Use the same procedure as for the RH side.
7. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
8. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Use the same procedure as for the RH side.
9. REMOVE NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL
10. REMOVE NO. 2 SWITCH HOLE BASE
11. REMOVE NO. 1 SWITCH HOLE BASE
12. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
13. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
14. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
HINT:
Use the same procedure as for the RH side.
15. REMOVE INSTRUMENT LOWER CENTER COVER (w/o Front Console Box)
16. REMOVE INSTRUMENT LOWER CENTER COVER (w/ Front Console Box)
17. REMOVE INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY
18. REMOVE BOX BOTTOM MAT
19. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL ASSEMBLY
20. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
21. REMOVE ENGINE SWITCH
|
(a) Disengage the 2 claws to remove the engine switch from the lower instrument panel finish panel assembly. |
|
|
|