Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000ZAQ2 |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS STARTING: ENGINE SWITCH: INSTALLATION; 2017 - 2020 MY Sienna [08/2016 - ] |
INSTALLATION
PROCEDURE
1. INSTALL ENGINE SWITCH
(a) Engage the 2 claws to install the engine switch to the lower instrument panel finish panel assembly.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
3. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL ASSEMBLY
4. REMOVE BOX BOTTOM MAT
5. INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY
6. INSTALL INSTRUMENT LOWER CENTER COVER (w/o Front Console Box)
7. INSTALL INSTRUMENT LOWER CENTER COVER (w/ Front Console Box)
8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
HINT:
Use the same procedure as for the RH side.
10. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
11. INSTALL NO. 1 SWITCH HOLE BASE
12. INSTALL NO. 2 SWITCH HOLE BASE
13. INSTALL NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL
14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT:
Use the same procedure as for the RH side.
16. INSTALL COWL SIDE TRIM BOARD RH
17. INSTALL COWL SIDE TRIM BOARD LH
HINT:
Use the same procedure as for the RH side.
18. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
19. INSTALL DOOR SCUFF PLATE ASSEMBLY LH
HINT:
Use the same procedure as for the RH side.
20. INSTALL CONSOLE BOX ASSEMBLY (for Slide Type)
21. INSTALL CONSOLE BOX ASSEMBLY (for Fixed Type)
|