| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000ZAPZ |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS STARTING: STARTER: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] | ||
REMOVAL
PROCEDURE
1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page
).
3. REMOVE AIR CLEANER INLET ASSEMBLY
Click here
4. REMOVE BATTERY
5. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
Click here
6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here
7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Click here
8. REMOVE STARTER ASSEMBLY
|
(a) Disconnect the starter connector. |
|
(b) Open the terminal cap.
(c) Remove the nut and disconnect the terminal 30.
|
(d) Remove the 2 nuts and the starter assembly. |
|
(e) Using an E8 "TORX" socket wrench, remove the 2 stud bolts.
|
|