| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000ZAPR |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS LUBRICATION: ENGINE OIL COOLER: INSTALLATION; 2017 - 2020 MY Sienna [08/2016 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL OIL COOLER ASSEMBLY
(a) Install the No. 1 cylinder block insulator and 2 new O-rings.
(b) Install the oil cooler assembly with the 2 bolts and 2 nuts.
Torque:
21 N·m {214 kgf·cm, 15 ft·lbf}
(c) Connect the No. 4 water by-pass hose and No. 5 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.
(d) Install the hose clamp with the nut.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
2. INSTALL EXHAUST MANIFOLD ASSEMBLY LH
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; 2GR-FKS (INTAKE / EXHAUST): EXHAUST MANIFOLD: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. ADD ENGINE OIL
Click here
4. CHECK ENGINE OIL LEVEL
Click here
5. INSPECT FOR ENGINE OIL LEAK
Click here
6. ADD ENGINE COOLANT
Click here
7. INSPECT FOR COOLANT LEAK
Click here
|
|