| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000ZAPA |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION; 2017 - 2020 MY Sienna [08/2016 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY
|
(a) Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly. Adhesive: Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent NOTICE:
|
|
(b) Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.
Torque:
15 N·m {153 kgf·cm, 11 ft·lbf}
NOTICE:
Do not start the engine for at least 1 hour after installation.
(c) Connect the engine oil pressure switch assembly connector.
(d) Connect the wire harness protector.
2. ADD ENGINE OIL
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; 2GR-FKS LUBRICATION: OIL AND OIL FILTER: REPLACEMENT+](/t3Portal/stylegraphics/info.gif)
3. CHECK ENGINE OIL LEVEL
Click here
4. INSPECT FOR ENGINE OIL LEAK
Click here
5. INSTALL FRONT FENDER APRON SEAL RH
Click here
|
|