Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000Z9UW |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (COOLING): THERMOSTAT: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
Click here
2. REMOVE COWL PANEL SUB-ASSEMBLY
Click here
3. REMOVE NO. 1 ENGINE UNDER COVER
4. DRAIN ENGINE COOLANT
Click here
5. REMOVE FAN AND GENERATOR V BELT
Click here
6. REMOVE NO. 2 ENGINE MOUNT STAY RH
Click here
7. REMOVE ENGINE MOVING CONTROL ROD
Click here
8. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH
Click here
9. DISCONNECT NO. 2 RADIATOR HOSE
Click here
10. DISCONNECT WATER BY-PASS HOSE
(a) Slide the clip and disconnect the water by-pass hose.
|
|
11. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
(a) Disconnect the water inlet with thermostat sub-assembly connector.
|
|
(b) Remove the 2 bolts, 2 nuts and water inlet with thermostat sub-assembly.
|
|
(c) Remove the gasket from the water inlet with thermostat sub-assembly.
|