| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000Z9UT |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS (COOLING): THERMOSTAT: INSTALLATION; 2017 - 2020 MY Sienna [08/2016 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
(a) Install a new gasket to the water inlet with thermostat sub-assembly.
(b) Install the water inlet with thermostat sub-assembly with the 2 bolts and 2 nuts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(c) Connect the water inlet with thermostat sub-assembly connector.
2. CONNECT WATER BY-PASS HOSE
(a) Connect the water by-pass hose and slide the clip to secure it.
3. CONNECT NO. 2 RADIATOR HOSE
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
4. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH
Click here
5. INSTALL ENGINE MOVING CONTROL ROD
Click here
6. INSTALL NO. 2 ENGINE MOUNTING STAY RH
Click here
7. INSTALL FAN AND GENERATOR V BELT
Click here
8. ADD ENGINE COOLANT
Click here
9. WARM UP ENGINE
10. INSPECT FOR COOLANT LEAK
Click here
11. INSTALL COWL PANEL SUB-ASSEMBLY
Click here
12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
Click here
13. INSTALL NO. 1 ENGINE UNDER COVER
|
|