Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000Z9K8 |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (ENGINE CONTROL): KNOCK SENSOR: INSTALLATION; 2017 - 2020 MY Sienna [08/2016 - ] |
INSTALLATION
PROCEDURE
1. INSTALL KNOCK SENSOR
HINT:
Perform "Inspection After Repair" after replacing a knock sensor.
Click here
(a) Temporarily install the 2 knock sensors to the cylinder block sub-assembly with the 2 bolts so that the knock sensor installation position is as shown in the illustration.
*A
|
for Bank 1
|
*B
|
for Bank 2
|
*a
|
View A
|
*b
|
View B
|
*c
|
Top
|
*d
|
Engine Front
|
*e
|
Engine Rear
|
*f
|
5°
|
*g
|
10°
|
|
Front
|
|
View A
|
|
View B
|
NOTICE:
-
If a knock sensor has been struck or dropped, replace it.
-
Make sure that the knock sensor is installed in the correct position.
(b) Tighten the bolt (A).
Torque:
20 N·m {204 kgf·cm, 15 ft·lbf}
|
|
*a
|
Torque Wrench Fulcrum Length
|
*b
|
10 mm Union Nut Wrench
|
|
|
(c) Using a 10 mm union nut wrench, tighten the bolt (B).
Torque:
Specified tightening torque :
20 N·m {204 kgf·cm, 15 ft·lbf}
(d) Connect the 2 knock sensor connectors.
2. INSTALL FUEL DELIVERY PIPE
Click here
3. PERFORM INITIALIZATION
(a) Perform "Inspection After Repair" after replacing a knock sensor.
Click here
|