Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000Z9K0 |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (TWC: Front Catalyst)
Click here
2. REMOVE CRANK POSITION SENSOR PROTECTOR
(a) w/ Oil Cooler:
(1) Remove the nut and hose clamp from the crankshaft position sensor protector.
|
|
(b) Remove the 3 bolts and crankshaft position sensor protector from the cylinder block sub-assembly and oil pan sub-assembly.
|
|
3. REMOVE CRANK POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
|
|
(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
NOTICE:
If the crankshaft position sensor has been struck or dropped, replace it.
|