Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000Z9JG
Model Year Start: 2017 Model: Sienna Prod Date Range: [08/2016 -           ]
Title: 2GR-FKS (ENGINE CONTROL): ACTIVE CONTROL ENGINE MOUNT: ON-VEHICLE INSPECTION; 2017 - 2020 MY Sienna [08/2016 -        ]

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT FRONT ENGINE MOUNTING INSULATOR

(a) Disconnect the vacuum hose from the front engine mounting insulator assembly.

(b) Using a vacuum pump, apply vacuum of 80 kPa (600 mmHg, 23.6 in.Hg) and wait for 1 minute.

(c) Check that there is no change in the needle movement of the vacuum pump gauge.

OK:

Vacuum pressure holds.

(d) Check that there is no fluid leakage caused by a break in the diaphragm.

(e) Connect the vacuum hose to the front engine mounting insulator assembly.