Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000Z9J5
Model Year Start: 2017 Model: Sienna Prod Date Range: [08/2016 -           ]
Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID(for Bank 2): INSTALLATION; 2017 - 2020 MY Sienna [08/2016 -        ]

INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.

*1

O-ring

(b) Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

*a

Adhesive

(c) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
  • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.

(d) Connect the camshaft timing oil control solenoid assembly connector.

2. INSTALL ENGINE MOVING CONTROL ROD

(a) Install the engine control rod to the front No. 1 engine mounting bracket RH and vehicle with the 3 bolts.

Torque:

38 N·m {387 kgf·cm, 28 ft·lbf}

3. INSTALL NO. 2 ENGINE MOUNTING STAY RH

Click here 2017 - 2020 MY Sienna [08/2016 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

4. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

(a) Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.

*1

O-ring

(b) Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

*a

Adhesive

(c) Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:

10 N·m {102 kgf·cm, 7 ft·lbf}

NOTICE:

  • If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
  • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.

(d) Connect the camshaft timing oil control solenoid assembly connector.

5. INSPECT FOR ENGINE OIL LEAK

Click here 2017 - 2020 MY Sienna [08/2016 -        ]; 2GR-FKS LUBRICATION: OIL AND OIL FILTER: REPLACEMENT+

6. INSTALL V-BANK COVER SUB-ASSEMBLY

Click here 2017 - 2020 MY Sienna [08/2016 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+