Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000Z9J3
Model Year Start: 2017 Model: Sienna Prod Date Range: [08/2016 -           ]
Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID(for Bank 2): REMOVAL; 2017 - 2020 MY Sienna [08/2016 -        ]

REMOVAL

PROCEDURE

1. REMOVE V-BANK COVER SUB-ASSEMBLY

Click here 2017 - 2020 MY Sienna [08/2016 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

(a) Disconnect the camshaft timing oil control solenoid assembly connector.

(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

NOTICE:

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.

NOTICE:

  • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
  • Do not drop the O-ring into the timing chain cover assembly.

3. REMOVE NO. 2 ENGINE MOUNTING STAY RH

Click here 2017 - 2020 MY Sienna [08/2016 -        ]; 2GR-FKS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

4. REMOVE ENGINE MOVING CONTROL ROD

(a) Remove the 3 bolts and engine moving control rod from the front No. 1 engine mounting bracket RH and vehicle.

5. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

(a) Disconnect the camshaft timing oil control solenoid assembly connector.

(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.

NOTICE:

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.

NOTICE:

  • If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
  • Do not drop the O-ring into the timing chain cover assembly.