Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000Z9J3 |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID(for Bank 2): REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE V-BANK COVER SUB-ASSEMBLY
Click here
2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
-
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
-
Do not drop the O-ring into the timing chain cover assembly.
|
|
3. REMOVE NO. 2 ENGINE MOUNTING STAY RH
Click here
4. REMOVE ENGINE MOVING CONTROL ROD
(a) Remove the 3 bolts and engine moving control rod from the front No. 1 engine mounting bracket RH and vehicle.
|
|
5. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
-
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
-
Do not drop the O-ring into the timing chain cover assembly.
|
|
|