Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000Z9IY |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID(for Bank 1): REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
Click here
2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
-
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
-
Do not drop the O-ring into the timing chain cover assembly.
|
|
3. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
(c) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
-
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
-
Do not drop the O-ring into the timing chain cover assembly.
|
|
|