| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000Z9IR |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL VALVE(for Bank 1): ON-VEHICLE INSPECTION; 2017 - 2020 MY Sienna [08/2016 - ] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; 2GR-FKS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID(for Bank 1): REMOVAL](/t3Portal/stylegraphics/info.gif)
2. INSPECT CAMSHAFT TIMING GEAR BOLT
(a) for intake side:
|
(1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 4.5 mm (0.177 in.) or more HINT: When pressing the plunger, there may be a stepped feeling. This is not a malfunction. If the result is not as specified, replace the camshaft timing gear bolt. |
|
(b) for exhaust side:
|
(1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 2.2 mm (0.0866 in.) or more HINT: When pressing the plunger, there may be a stepped feeling. This is not a malfunction. If the result is not as specified, replace the camshaft timing gear bolt. |
|
3. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY
Click here
|
|