| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000Z297 |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: HEATING / AIR CONDITIONING: PTC HEATER ASSEMBLY: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
Click here
![2016 - 2017 MY Sienna [12/2015 - 11/2017]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL](/t3Portal/stylegraphics/info.gif)
2. REMOVE NO. 5 INSTRUMENT PANEL BRACKET
Click here
3. REMOVE TELEVISION BRACKET
Click here
4. REMOVE NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY
Click here
5. REMOVE NO. 4 AIR DUCT SUB-ASSEMBLY
Click here
6. REMOVE PTC HEATER ASSEMBLY
|
(a) Disconnect the 2 connectors. |
|
(b) Disengage the 3 clamps.
|
(c) Remove the screw. |
|
(d) Disengage the 3 guides to separate the connector cover.
|
(e) Disengage the 3 claws and clamp to remove the cover plate. |
|
|
(f) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to disconnect the 2 connectors. |
|
|
(g) Remove the 2 screws and PTC heater assembly. |
|
|
|