Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000YZ5H |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: BRAKE SYSTEM (OTHER): VACUUM PUMP: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE FRONT WIPER ARM HEAD CAP
Click here
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
Click here
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
Click here
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
Click here
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
Click here
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Click here
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
Click here
8. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY
Click here
9. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
Click here
10. REMOVE INLET AIR CLEANER ASSEMBLY
Click here
11. REMOVE BATTERY
Click here
12. REMOVE V-BANK COVER SUB-ASSEMBLY
Click here
13. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
Click here
14. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
Click here
15. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
Click here
16. DISCONNECT AIR TUBE
(a) Slide the clip and disconnect the air tube from the vacuum pump assembly.
|
|
17. SEPARATE ENGINE ROOM MAIN WIRE
(a) Disconnect the 6 connectors.
|
|
(c) Disconnect the 2 connectors.
|
|
(d) Remove the bolt and separate the engine room main wire.
18. REMOVE VACUUM PUMP ASSEMBLY
(a) Remove the 3 bolts and vacuum pump assembly from the engine assembly.
|
|
(b) Remove the 2 O-rings from the vacuum pump assembly.
|
|
|