INSTALLATION

PROCEDURE

1. INSTALL PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

(a) Apply a light coat of engine oil to the O-ring.

(b) Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly LH.

Torque:

5.0 N·m {51 kgf·cm, 44 in·lbf}

NOTICE:

When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.

2. CONNECT VENTILATION HOSE

(a) Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.

*a Top of Vehicle *b Right Side of Vehicle *c 45° *d Hose Paint Mark

3. INSTALL V-BANK COVER SUB-ASSEMBLY

Click here