Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000YXEY |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: TIRE / WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION; 2017 - 2020 MY Sienna [08/2016 - ] |
INSPECTION
PROCEDURE
1. INSPECT TIRES
(a) Check the tires for wear and proper inflation pressure.
Cold Tire Inflation Pressure:
Tire Size
|
Front
kPa (kgf/cm2, psi)
|
Rear
kPa (kgf/cm2, psi)
|
P235/60R17 100T
|
240 (2.4, 35)
|
240 (2.4, 35)
|
235/55R18 100V
235/55RF18 100T
P235/50R19 99V
|
250 (2.5, 36)
|
250 (2.5, 36)
|
(b) Using a dial indicator, check the runout of the tires.
Maximum tire runout:
1.4 mm (0.0551 in.)
|
|
2. ROTATE TIRES
(a) Rotate the tires as shown in the illustration.
Text in Illustration
|
|
3. INSPECT WHEEL BALANCE
(a) Check and adjust the off-the-car balance.
Maximum wheel imbalance after adjustment:
8.0 g (0.0176 lb)
NOTICE:
-
Use a cleaning detergent to remove dirt, oil and water from the surface where the balance weight is to be adhered.
-
Do not touch the sticking surface of the tape.
-
Adhere a sticking type balance weight to the flat surface (A) shown in the illustration.
Width (A):
25 mm (0.984 in.)
-
Push the balance weight securely with your finger to adhere it to the position.
-
Do not reuse the balance weight.
-
Use the TOYOTA genuine sticking type balance weights.
HINT:
The inner side balance weight should be installed by clipping it to the rim.
|
|
4. INSPECT FRONT AXLE HUB
Click here
5. INSPECT REAR AXLE HUB
Click here
|