Last Modified: 04-05-2023 |
6.11:8.1.0 |
Doc ID: RM100000000YW9P |
Model Year Start: 2017 |
Model: Sienna |
Prod Date Range: [08/2016 -
] |
Title: 2GR-FKS (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] |
REMOVAL
PROCEDURE
1. REMOVE FAN AND GENERATOR V BELT
Click here
2. REMOVE CRANKSHAFT PULLEY
(a) Using SST to hold the crankshaft pulley, loosen the crankshaft pulley set bolt. Further loosen the crankshaft pulley set bolt until 2 or 3 threads remain screwed into the crankshaft.
*a
|
Hold
|
|
Turn
|
SST: 09213-70011
09213-70020
SST: 09330-00021
(b) Using SST, remove the crankshaft pulley set bolt and crankshaft pulley.
*a
|
Hold
|
|
Turn
|
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021
3. REMOVE TIMING CHAIN CASE OIL SEAL
(a) Using a screwdriver with its tip wrapped with protective tape, pry out the timing chain case oil seal.
NOTICE:
After removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.
|
|
|