| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000YQSP |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS (FUEL): FUEL SENDER GAUGE ASSEMBLY: INSPECTION; 2017 - 2020 MY Sienna [08/2016 - ] | ||
INSPECTION
PROCEDURE
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Check the fuel sender gauge resistance.
|
*a |
Component without harness connected (Fuel Sender Gauge Assembly) |
- |
- |
(b) Check that the float moves smoothly between the F level (upper end) and E level (lower end).
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Float Level |
Float Position (mm (in.)) |
Specified Condition |
|---|---|---|---|
|
1 - 2 |
F |
114.2 (4.496) |
13.5 to 16.5 Ω |
|
1/2 |
66.1 (2.602) |
202 to 223 Ω |
|
|
E |
0 (0) |
405.5 to 414.5 Ω |
If the result is not as specified, replace the fuel sender gauge assembly.
|
|