| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000YQS5 |
| Model Year Start: 2017 | Model: Sienna | Prod Date Range: [08/2016 - ] |
| Title: 2GR-FKS (FUEL): FUEL PRESSURE SENSOR(for High Pressure): REMOVAL; 2017 - 2020 MY Sienna [08/2016 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
PROCEDURE
1. REMOVE FUEL DELIVERY PIPE WITH SENSOR ASSEMBLY LH (FUEL PRESSURE SENSOR)
Click here
![2017 - 2020 MY Sienna [08/2016 - ]; 2GR-FKS (FUEL): FUEL INJECTOR (for Direct Injection): REMOVAL](/t3Portal/stylegraphics/info.gif)
NOTICE:
- Do not remove the fuel pressure sensor from the fuel delivery pipe with sensor assembly LH.
- If the fuel pressure sensor is removed, replace the fuel delivery pipe with sensor assembly LH (fuel pressure sensor) with a new one.
2. REMOVE FUEL PIPE PLUG SUB-ASSEMBLY
|
(a) Secure the fuel delivery pipe with sensor assembly LH in a vise between aluminum plates. NOTICE: Do not overtighten the vise. |
|
(b) Using a 5 mm hexagon socket wrench, remove the 2 bolts, gasket and fuel pipe plug sub-assembly from the fuel delivery pipe with sensor assembly LH.
(c) Remove the dust cap sub-assembly from the fuel pipe plug sub-assembly.
(d) Remove the O-ring, No. 1 fuel injector back-up ring, No. 2 fuel injector back-up ring and No. 3 fuel injector back-up ring from the fuel pipe plug sub-assembly.
(e) Remove the fuel delivery pipe with sensor assembly LH from the vise.
|
|