| Last Modified: 04-05-2023 | 6.11:8.1.0 | Doc ID: RM100000000WPQ9 |
| Model Year Start: 2016 | Model: Sienna | Prod Date Range: [12/2015 - ] |
| Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING; 2016 - 2020 MY Sienna [12/2015 - ] | ||
|
HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
HINT:
- Use these procedures to troubleshoot the combination meter.
- *: Use the Techstream.
PROCEDURE
|
1. |
VEHICLE BROUGHT TO WORKSHOP |
|
|
2. |
INSPECT BATTERY VOLTAGE |
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
|
3. |
CHECK CAN COMMUNICATION SYSTEM* |
(a) Use the Techstream to check if the CAN communication system is functioning normally.
|
Result |
Proceed to |
|---|---|
|
CAN communication DTC is not output |
A |
|
CAN communication DTC is output |
B |
| B |
|
GO TO CAN COMMUNICATION SYSTEM
|
|
|
4. |
REFER TO PROBLEM SYMPTOMS TABLE |
|
Result |
Proceed to |
|---|---|
|
Fault is not listed in Problem Symptoms Table |
A |
|
Fault is listed in Problem Symptoms Table |
B |
| B |
|
|
|
5. |
CONDUCT OVERALL ANALYSIS AND TROUBLESHOOTING* |
(a) Data List/Active Test
Click here
![2016 MY Sienna [12/2015 - 08/2016]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: DATA LIST / ACTIVE TEST](/t3Portal/stylegraphics/info.gif)
(b) Terminals of ECU
Click here
(c) On-vehicle Inspection
Click here
|
|
6. |
ADJUST, REPAIR OR REPLACE |
|
|
7. |
CONDUCT CONFIRMATION TEST* |
| NEXT |
|
END |
|
|