Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKJM
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: EXTERIOR PANELS / TRIM: REAR DOOR WINDOW FRAME MOULDING: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

(a) Using an infrared light, heat the rear door window frame rear moulding.

Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

CAUTION:

Do not burn yourself on the hot body panel or with the infrared light.

NOTICE:

  • Do not heat the vehicle body excessively.
  • Remove any tape remaining on the rear door panel.

(b) Pull out the rear door window frame rear moulding with the door closed, and then remove the rear door window frame rear moulding while peeling off the double-sided tape.

Text in Illustration

*1

Double-sided Tape