Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKJG
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: EXTERIOR PANELS / TRIM: REAR DOOR BELT MOULDING: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

(See page 2016 - 2020 MY Sienna [12/2015 -        ]; EXTERIOR PANELS / TRIM: REAR DOOR WINDOW FRAME MOULDING: REMOVAL )

2. REMOVE REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

(a) Apply protective tape to the door panel in the area around the rear door glass outer weatherstrip.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, disengage the 6 claws, 2 clips and remove the rear door glass outer weatherstrip.

Text in Illustration

*1

Moulding Remover