Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKJD
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: EXTERIOR PANELS / TRIM: FRONT DOOR BELT MOULDING: REMOVAL; 2016 - 2020 MY Sienna [12/2015 -        ]

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the RH and LH side.
  • The procedure described below is for the LH side.

PROCEDURE

1. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY

(See page 2016 - 2017 MY Sienna [12/2015 - 11/2017]; MIRROR (EXT): OUTER REAR VIEW MIRROR: REMOVAL 2018 - 2020 MY Sienna [11/2017 -        ]; MIRROR (EXT): OUTER REAR VIEW MIRROR: REMOVAL )

2. REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY

(a) Apply protective tape to the door panel in the area around the front door glass outer weatherstrip.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, disengage the 5 claws, clip and remove the front door glass outer weatherstrip.

Text in Illustration

*1

Moulding Remover