Last Modified: 04-05-2023 6.11:8.1.0 Doc ID: RM100000000VKJ0
Model Year Start: 2016 Model: Sienna Prod Date Range: [12/2015 -           ]
Title: EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION; 2016 - 2020 MY Sienna [12/2015 -        ]

INSTALLATION

PROCEDURE

1. INSTALL NO. 6 REAR SPOILER PROTECTOR

HINT:

When installing the No. 6 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 6 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 6 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 6 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the No. 6 rear spoiler protector as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 6 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 6 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

2. INSTALL NO. 5 REAR SPOILER PROTECTOR

HINT:

When installing the No. 5 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 5 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 5 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 5 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 3 No. 5 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 5 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 5 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

3. INSTALL NO. 10 REAR SPOILER PROTECTOR

HINT:

When installing the No. 10 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 10 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 10 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 10 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 5 No. 10 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 10 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 10 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

4. INSTALL NO. 4 REAR SPOILER PROTECTOR

HINT:

When installing the No. 4 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 4 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 4 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 4 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 2 No. 4 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 4 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 4 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

5. INSTALL NO. 3 REAR SPOILER PROTECTOR

HINT:

When installing the No. 3 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 3 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 3 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 3 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 2 No. 3 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 3 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 3 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

6. INSTALL NO. 3 REAR SPOILER PROTECTOR

HINT:

When installing the No. 3 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 3 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 3 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 3 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 2 No. 3 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 3 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 3 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

7. INSTALL NO. 2 REAR SPOILER PROTECTOR

HINT:

When installing the No. 2 rear spoiler protectors, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the No. 2 rear spoiler protector as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

8. INSTALL NO. 2 REAR SPOILER PROTECTOR

HINT:

When installing the No. 2 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the 2 No. 2 rear spoiler protectors as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

9. INSTALL NO. 2 REAR SPOILER PROTECTOR

HINT:

When installing the No. 2 rear spoiler protector, heat the rear spoiler cover using a heat light.

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

Standard:

Item

Temperature

Rear spoiler cover

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the rear spoiler cover excessively.

(a) Clean the No. 2 rear spoiler protector installation surface with a non-residue solvent.

(b) Apply primer to the No. 2 rear spoiler protector installation area on the rear spoiler cover.

NOTICE:

Apply primer evenly so that there are no uncoated areas.

(c) Remove the peeling paper on a new No. 2 rear spoiler protector while making sure not to touch the adhesive surface.

(d) Install the No. 2 rear spoiler protector as shown in the illustration.

NOTICE:

  • Press the double-sided tape on the No. 2 rear spoiler protector firmly to attach.
  • After the primer dries (3 minutes or more), install the No. 2 rear spoiler protector.
  • After applying primer, reapply primer after 24 hours elapse.

10. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) Clean the attachment surface.

(1) Using an infrared light, heat the double-sided adhesive tape remaining on the back door panel.

Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

CAUTION:

Do not burn yourself on the hot body panel or with the infrared light.

NOTICE:

Do not heat the vehicle body excessively.

(2) Using a piece of cloth, rub the remaining double-sided tape off the back door panel while it is hot from the infrared light.

NOTICE:

Installing the rear spoiler while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided adhesive tape.

(3) Using a non-residue solvent, clean the attachment surface.

(b) Engage the 2 clips, pin and install the rear spoiler.

(c) Tighten the 4 bolts.

Torque:

5.9 N·m {60 kgf·cm, 52 in·lbf}

(d) Install the 2 hole plugs.

11. INSTALL BACK DOOR CENTER GARNISH

2016 - 2020 MY Sienna [12/2015 -        ]; DOOR / HATCH: BACK DOOR: REASSEMBLY+